Pz.Kpfw. VII Buff Request

Draschel: The biggest buff required is a gun mantlet buff surrounding the barrel. It is pathetically weak. For some reason the turret armor behind the gun shield isn't modeled into the game, and is a void space.1-  The gun shield and ring are supposed to have base armor of 70mm, but it gets left out in some spots but is present in other spots. This at times leaves the armor as only a 120mm spaced armor or 160mm spaced armor exterior shield, and naked under. Rather than what should be there, 120+70 or 160+70. The surrounding parts of the mantlet are fine, which have this 70mm base armor present, becoming 200+70 or 300+70 or 200+160 even 200+220 - these of course are not problems and how the front turret armor should be. Just give the `120 and 160 sections the 70mm base armor behind. 2-  secondly, like its CW cousin VK7201, fix the turret mounting into the sides of the tank, the barbette. The bulge, which houses the turret ring. VK7201 got buffs so it is not as weak when side scraping, instead of 160mm flattening out in angle when side scraping, the area was increased to 180,190,200mm. The Panzer 7 however it stays only 160mm, making it very weak side scraping like tanks with similar issues such as FV215B and 183. Object 268 V 4 does not have this problem, as the cheeks / shoulders that flatten out when angled, are extremely thick, 220mm. so make them thick. AE Phase, 60 TP, and 50TP proto also share this cheek problem when side scraping3-  Make the engine roof in the front 50mm on most german super heavy tanks, not 40mm, so no 122-130mm overmatch4-  Make APCR more effective. The AP is 12 pen more than Maus and E100 L55 128mm, so too should the APCR be 12 pen more. Make the APCR 323 mm penetration I think these fix Panzer 7, and make it more comparable to VK7201 and 705A. Would it become competitive, probably not. so the changes shouldn't be too much to ask for or game changing